POWER SUPPLIES

ORDERING INFO

DOWNLOADS

Select a drop down menu for ordering information

Power Supplies Cut sheet

Photocell Spec Sheet

ENCL-11 Spec Sheet

  • 12V DC DIMMING DRIVERS

    PS-12-12VPI-T 3-12W (non-dimming), 4-12W (dimming applications)

     

    12V DC constant voltage plug-in driver, Class 2

    100-120V AC, 60Hz input via 6ft power cord with rocker switch

    6ft lead with terminal block, triac compatible (only), c/UL/us Listed for dry locations Replace power cord with supply wire via built-in terminal block for hardwire applications
    4-11/16”L x 2-3/8”W x 11/16”H

    ELV-30-12 3-30W (non-dimming), 18-30W (dimming applications)

    ELV-45-12 3-45W (non-dimming) 27-45W (dimming applications)

     

    12V DC constant voltage hardwire driver, Class 2, RoHS compliant

    100-130V AC, 50/60Hz input via built-in terminal block with strain relief screw-down cover Forward phase / reverse phase / triac compatible

    c/ETL/us Listed for dry locations

    7-1/16”L x 2-3/8”W x 1-3/8”H

    ELV-60J-12 3-60W (non-dimming), 36-60W (dimming applications)

    ELV-80J-12 3-80W (non-dimming), 48-80W (dimming applications)

     

    12V DC constant voltage hardwire driver inside metal housing with three 1/2”

    knockouts on both the primary and the secondary ends, Class 2, RoHS compliant

    100-130V AC, 50/60Hz input via 5” long 18AWG 3C conductors

    Forward phase / reverse phase / triac compatible

    c/ETL/us Listed for wet locations, must be mounted higher than 1ft off the ground

    13-3/4”L x 3-1/16”W x 2-5/16”H

  • 12V DC NON-DIMMING DRIVERS

    PS-40-12VPI 8-40W (non-dimming)

     

    12V DC constant voltage plug-in driver

    120V AC input via 6ft 18AWG power cord with 3-prong grounded plug 5ft 18AWG lead wire with DC jack, c/UL/us Listed for dry locations

    4-3/4”L x 1-1/2”W x 2-5/16”H

    PS-96-12VPI 20-96W (non-dimming)

     

    12V DC, constant voltage plug-in driver

    5.5 foot 18AWG lead wire with DC jack, 5.5 foot 18AWG power cord with 120V AC input via 3-prong grounded plug; c/UL/us Listed for dry locations
    6-3/4”L x 2-3/4”W x 1-5/16”H

    LED-DR30-12 6-30W (non-dimming), 1-27W (PWM dimming)

     

    12V DC constant voltage hardwire driver, Class 2, RoHS compliant

    100-240V AC 50/60Hz input via built-in terminal block with strain relief screw-down cover If used with AL-PWM-6A (see page 208), the dimmer will consume ±3W internally

    c/UR/us Recognized for indoor use only

    6-1/4”L x 1-3/4”W x 1-3/16”H

    LED-DR60-12 12-60W (non-dimming), 1-57W (PWM dimming)

     

    12V DC constant voltage hardwire driver, Class 2, RoHS compliant

    100-240V AC 50/60Hz input via 22” 18AWG conductors

    If used with AL-PWM-6A (see page 208), the dimmer will consume ±3W internally

    c/UR/us Recognized for dry and damp locations, 7-13/16”L x 1-3/4”W x 1-5/8”H

    Galvanized steel wiring enclosure (ENCL-11) sold separately

    11-1/2”L x 1-7/8”W x 1-3/4”H

    LED-DR100-12 20-100W (non-dimming) 1-97W (PWM dimming)

     

    12V DC constant voltage hardwire driver, RoHS compliant

    100-240V AC 50/60Hz input via 11” 18AWG conductors

    If used with AL-PWM-6A (see page 208), the dimmer will consume ±3W internally

    and will require a repeater for loads greater than 6A (72W at 12V)

    7-5/8”L x 2-1/8”W x 1-1/2”H

    LED-DR150-12 30-150W (non-dimming) 1-147W (PWM dimming)

     

    12V DC constant voltage hardwire driver, RoHS compliant

    100-277V AC 50/60Hz input via 10” 18AWG SJTW conductors

    If used with AL-PWM-6A (see page 208), the dimmer will consume ±3W internally and

    will require a repeater for loads greater than 6A (72W at 12V)

    c/UR/us Recognized for wet or dry locations

    9”L x 2-5/8”W x 1-1/2”H

    PS-25-12 5-25W (non-dimming), 1-22W (PWM dimming); 4”L x 3-7/8”W x 1-7/16”H

    PS-60-12 12-60W (non-dimming), 1-57W (PWM dimming); 6-1/4”L x 3-7/8”W x 1-1/2”H

    PS-150-12 30-150W (non-dimming), 1-147W (PWM dimming); 7-7/8”L x 4-7/8”W x 2”H

     

    12V DC Constant voltage hardwire driver with double output screw-down terminals

    100-264V AC input via screw-down terminals (PS-150-12/24 has switchable input, either 120V AC of 240V AC)

    Overload/overvoltage/short circuit protection

    c/UR/us Recognized

  • 12V AC ELECTRONIC TRANSFORMERS

    ALTR60B 10-60W capacity

     

    12V AC electronic hardwire transformer, Class 2

    7” 18AWG primary and 5” 12AWG secondary leads

    Thermal protection with auto reset; mounting screws included

    Triac / reverse phase compatible

    c/UR/us Recognized for dry locations

    For runs up to 10ft only

    2-1/4”L x 1-5/16”W x 7/8”H

    ALTR105B 35-105W capacity

     

    12V AC electronic hardwire transformer, Class 2

    7” 18AWG primary and 5” 12AWG secondary leads

    Thermal protection with auto reset; mounting screws included

    Triac / reverse phase compatible

    c/UR/us Recognized for dry locations

    For runs up to 10ft only

    4-5/16”L x 1-7/8”W x 1-1/4”H

  • 12V AC MAGNETIC

    12V AC Magnetic Transformers

    TR-600-12 240-600W capacity with (2) 25A circuits; 9-1/2”L x 4-1/2”W x 4-1/2”H

    TR-900-12 360-900W capacity with (3) 25A circuits; 10-1/2”L x 5-1/2”W x 5-1/2”H

     

    12V AC magnetic hardwire transformer with boost tap for longer runs

    120V AC, 60Hz input - Do not connect 120V power to the input side of the transformer without a secondary load attached - this may damage the secondary coil and cause it to fail. Triac / forward phase compatible - use high capacity dimmers for loads over 600 watts Stainless steel enclosure with powder coat finish, hinged tension fit door, hang tab, multiple 1/2” knockouts, magnetic circuit breaker protection for each circuit and manual reset switch c/UL/us Listed with NEMA 3R rating for indoor and outdoor use

     

    12V AC Magnetic Drivers

    LED-TR-30-12 12-30W capacity; 5-1/2”L x 3-1/8”W x 1-1/2”H

    LED-TR-60-12 24-60W capacity; 9-1/4”L x 3”W x 3”H

    LED-TR-100-12 40-100W capacity; 9-1/2”L x 4”W x 4”H

    LED-TR-150-12 60-150W capacity; 9-1/2”L x 4”W x 4”H

     

    12V AC, 120Hz output* magnetic hardwire driver; 120V AC, 60Hz input

    Do not connect 120V power to the input side of the transformer without a secondary load attached - this may damage the secondary coil and cause it to fail.

    Housing requires 12” clearance above and around housing if load exceeds 80% of capacity Reverse phase compatible
    Stainless steel enclosure with powder coat finish, hinged tension fit door, hang tab, multiple 1/2” knockouts and reset switch

    c/ETL/us Listed (excluding LED-TR-30-12); NEMA 3R rating for indoor and outdoor use

     

  • 24V DC DIMMING DRIVERS

    ELV-30-24 3-30W (non-dimming), 18-30W (dimming applications)

    ELV-45-24 3-45W (non-dimming) 27-45W (dimming applications)

     

    24V DC constant voltage hardwire driver, Class 2, RoHS compliant

    100-130V AC, 50/60Hz input via built-in terminal block with strain relief screw-down cover Forward phase / reverse phase / triac compatible

    c/ETL/us Listed for dry locations

    7-1/16”L x 2-3/8”W x 1-3/8”H

    ELV-60J-24 3-60W (non-dimming), 36-60W (dimming applications)

    ELV-80J-24 3-80W (non-dimming), 48-80W (dimming applications)

     

    24V DC constant voltage hardwire driver inside metal housing with three 1/2” knockouts
    on both the primary and the secondary ends, Class 2, RoHS compliant

    100-130V AC, 50/60Hz input via 5” long 18AWG 3C conductors

    Forward phase / reverse phase / triac compatible

    c/ETL/us Listed for wet locations, must be mounted higher than 1ft off the ground

    13-3/4”L x 3-1/16”W x 2-5/16”H

  • 24V DC NON-DIMMING DRIVERS

    PS-40-24VPI 8-40W (non-dimming)

    PS-60-24VPI 12-60W (non-dimming)

     

    24V constant voltage plug-in driver

    120V AC input via 6ft 18AWG power cord with 3-prong grounded plug 5ft 18AWG lead wire with DC jack, c/UL/us Listed for dry locations

    4-3/4”L x 1-1/2”W x 2-5/16”H

    PS-90-24VPI 18-90W (non-dimming)

     

    24V DC, constant voltage plug-in driver

    5.5 foot 18AWG lead wire with DC jack, 5.5 foot 18AWG power cord with 120V AC input via 3-prong grounded plug; c/UL/us Listed for dry locations
    6-3/4”L x 2-3/4”W x 1-5/16”H

    LED-DR30-24 6-30W (non-dimming), 1-27W (PWM dimming)

     

    24V DC constant voltage hardwire driver, Class 2, RoHS compliant

    100-240V AC 50/60Hz input via built-in terminal block with strain relief screw-down cover If used with AL-PWM-6A (see page 208), the dimmer will consume ±3W internally

    c/UR/us Recognized for indoor use only

    6-1/4”L x 1-3/4”W x 1-3/16”H

    LED-DR60-24 12-60W (non-dimming), 1-57W (PWM dimming)

     

    24V DC constant voltage hardwire driver, Class 2, RoHS compliant

    100-240V AC 50/60Hz input via 22” 18AWG conductors

    If used with AL-PWM-6A (see page 208), the dimmer will consume ±3W internally

    c/UR/us Recognized for dry and damp locations, 7-13/16”L x 1-3/4”W x 1-5/8”H

    Galvanized steel wiring enclosure (ENCL-11) sold separately, 11-1/2”L x 1-7/8”W x 1-3/4”H

    LED-DR60-24-277 12-60W (non-dimming), 1-57W (PWM dimming)

     

    24V DC constant voltage hardwire driver, Class 2, RoHS compliant

    120-277V AC 50/60Hz input via 22” 18AWG conductors

    If used with AL-PWM-6A (see page 208), the dimmer will consume ±3W internally

    c/UR/us Recognized for dry and damp locations, 7-13/16”L x 1-3/4”W x 1-5/8”H

    Galvanized steel wiring enclosure (ENCL-11) sold separately, 11-1/2”L x 1-7/8”W x 1-3/4”H

    LED-DR100-24 20-100W (non-dimming) 1-97W (PWM dimming)

     

    24V DC constant voltage hardwire driver, RoHS compliant

    100-240V AC 50/60Hz input via 11” 18AWG conductors

    If used with AL-PWM-6A (see page 208), the dimmer will consume ±3W internally

    and will require a repeater for loads greater than 6A (72W at 12V)

    7-5/8”L x 2-1/8”W x 1-1/2”H

    LED-DR150-24 30-150W (non-dimming) 1-147W (PWM dimming)

     

    24V DC constant voltage hardwire driver, RoHS compliant

    100-277V AC 50/60Hz input via 10” 18AWG SJTW conductors

    If used with AL-PWM-6A (see page 208), the dimmer will consume ±3W internally and

    will require a repeater for loads greater than 6A (72W at 12V)

    c/UR/us Recognized for wet or dry locations

    9”L x 2-5/8”W x 1-1/2”H

    PS-25-24 5-25W (non-dimming), 1-22W (PWM dimming); 4”L x 3-7/8”W x 1-7/16”H

    PS-60-24 12-60W (non-dimming), 1-57W (PWM dimming); 6-1/4”L x 3-7/8”W x 1-1/2”H

    PS-150-24 30-150W (non-dimming), 1-147W (PWM dimming); 7-7/8”L x 4-7/8”W x 2”H

     

    24V DC Constant voltage hardwire driver with double output screw-down terminals

    100-264V AC input via screw-down terminals (PS-150-12/24 has switchable input, either 120V AC of 240V AC)

    Overload/overvoltage/short circuit protection

    c/UR/us Recognized

  • 24v AC MAGNETIC

    24V AC Magnetic Transformers

    TR-150-24 60-150W capacity with (1) 7A circuit; 8-1/2”L x 3-1/2”W x 3-1/2”H

    TR-300-24 120-300W capacity with (1) 15A circuit; 9”L x 4-1/2”W x 4-1/2”H

    TR-600-24 240-600W capacity with (1) 20A circuit; 9-1/2”L x 4-1/2”W x 4-1/2”H

    TR-900-24 360-900W capacity with (2) 25A circuits; 10-1/2”L x 5-1/2”W x 5-1/2”H

     

    24V AC magnetic hardwire transformer with boost tap for longer runs

    120V AC, 60Hz input - Do not connect 120V power to the input side of the transformer without a secondary load attached - this may damage the secondary coil and cause it to fail. Triac / forward phase compatible - use high capacity dimmers for loads over 600 watts Stainless steel enclosure with powder coat finish, hinged tension fit door, hang tab, multiple 1/2” knockouts, magnetic circuit breaker protection for each circuit and manual reset switch c/UL/us Listed with NEMA 3R rating for indoor and outdoor use

    24V AC Magnetic Drivers

    LED-TR-30-24 12-30W capacity; 5-1/2”L x 3-1/8”W x 1-1/2”H

    LED-TR-60-24 24-60W capacity; 9-1/4”L x 3”W x 3”H

    LED-TR-100-24 40-100W capacity; 9-1/2”L x 4”W x 4”H

    LED-TR-150-24 60-150W capacity; 9-1/2”L x 4”W x 4”H

     

    24V AC, 120Hz output* magnetic hardwire driver; 120V AC, 60Hz input

    Do not connect 120V power to the input side of the transformer without a secondary load attached - this may damage the secondary coil and cause it to fail.

    Housing requires 12” clearance above and around housing if load exceeds 80% of capacity Reverse phase compatible

    Stainless steel enclosure with powder coat finish, hinged tension fit door, hang tab, multiple 1/2” knockouts and reset switch

    c/ETL/us Listed (excluding LED-TR-30-24); NEMA 3R rating for indoor and outdoor use

  • PWM DIMMING

    AL-PWM-6A

     

    Pulse Width Modulation (PWM) White slide dimmer with on/off switch Fits most decorative style trim plates and standard junction boxes

    12V DC or 24V DC input only, 6A maximum load

    AL-3R-6A

     

    Repeater for PWM slide dimmer with (2) power input terminals

    and (1) signal input terminal, (3) x 6A output terminals

    12V DC or 24V DC input only

    5”L x 2-1/2”W x 1-1/16”H

  • 350MA DRIVERS

    LED-DR6-350 1-6W capacity

     

    350mA constant current hardwire driver, Class 2, RoHS compliant

    120-277AC, 50/60Hz input; 1-6W Capacity; 7” input and output leads

    1-4 LEDs (non-dimming applications)

    cURus Recognized for dry and damp locations

    2-3/8”L x  2”W x 1"H

    LED-DR16-350 4-16W capacity

     

    350mA constant current hardwire driver, Class 2, RoHS compliant

    100-240AC, 50/60Hz input; 3-16W Capacity; 5” input and output leads

    3-11 LEDs (non-dimming applications)

    c/UR/us Recognized for dry and damp locations

    3-1/2”L x 1-5/8”W x 1-3/16”H

    LED-DR18-350D2 4-18W capacity, 3-15W (dimming applications)

     

    350mA constant current hardwire driver, Class 2, RoHS compliant

    120-277AC, 50/60Hz input; 4-18W Capacity; 8” input and output leads

    3-12 LEDs (dimming consumes some power internally)

    c/UR/us Recognized for dry and damp locations

    6”L x 1-1/8”W x1-3/16”H

  • 700MA DRIVERS

    LED-DR12-700 3-12W capacity

     

    700mA constant current hardwire driver, Class 2, RoHS compliant

    100-240AC, 50/60Hz input; 3-12W Capacity; 5” input and output leads

    1-3 LEDs (non-dimming applications)

    c/UR/us Recognized for dry and damp locations

    3-1/2”L x 1-5/8”W x 1-3/16”H

    LED-DR25-700 8-25W capacity

     

    700mA constant current hardwire driver, Class 2, RoHS compliant

    100-240AC, 50/60Hz input; 8-25W Capacity; 22” input and output leads

    3-6 LEDs (non-dimming applications)

    c/UR/us Recognized for dry and damp locations

    3-3/8”L x 2-1/4”W x 1-1/8”H

    LED-DR36-700D 3-33W (dimming applications)

     

    700mA constant current hardwire driver, Class 2, RoHS compliant

    120-277AC, 50/60Hz input; 3-33W Capacity; 8” input and output leads

    1-10 LEDs (dimming consumes some power internally)

    c/UR/us Recognized for dry and damp locations

    6”L x 1-1/8”W x1-3/16”H

  • PHOTOCELL

    PC-120 120V AC

     

    Dusk-to-Dawn pencil photocell for 1/2" NPS hole

  • ENCLOSURE

    ENCL-11

     

    Galvanized steel enclosure with lid and 1/2” knockouts